Hidden home technology logo

Grimm Audio MU2 firmware update: new noise shaping for the DAC

Grimm Audio news · 11 November 2026

Grimm Audio has released firmware version 1.0.8 for the MU2, and the change Grimm puts first is in the DAC. Grimm says the update improves the DAC’s sound quality, and the change log credits that to the noise shaping in the FPGA. The update also fixes a possible click when the sample rate changes and steadies UPnP playback with JPlay.

The Grimm Audio MU2 in black, seen from the front, with its round dial on top and a colour display showing the track playing
The Grimm Audio MU2, a music streamer with its own DAC and analogue preamplifier. Image: Grimm Audio.

What’s new for the MU2’s DAC

Grimm announced the update in its news on 10 November, writing that “The MU2 received improvements in the sound quality of the DA converter”. The version 1.0.8 change log lists the work in one line as an “FPGA DAC noise shaping sound quality improvement”.

The MU2’s DAC builds its output from very few levels, which leaves a lot of noise, so its noise shaper pushes that noise up out of the audio band to above 20 kHz. The noise shaping runs in an FPGA, a programmable chip on Grimm’s own board, which is why a firmware update can change it.

What Eelco Grimm told us

We asked Eelco Grimm, Grimm Audio’s co-founder and designer, what had changed, and he wrote back.

“We are continuously improving the FPGA code. Our people were able to increase its efficiency and immediately used the resulting extra calculation space to further increase the resolution in the path from decimator to noise shaper. I’m sure this will not be the last time…”

He added that “It’s probably not the biggest improvement, although a customer with a highly resolving system wrote us that his [jaw] fell on the floor.”

The technical version

Inside the MU2’s FPGA the digital signal passes through a chain of calculations before the noise shaper turns it into the 1.5-bit signal that drives Grimm’s DAC hardware. One of those stages is a decimator, a filter that lowers the sample rate, and the change is in the path from the decimator to the noise shaper. Every calculation in that path works to a set number of bits, and each time a result is rounded to fit, a tiny error joins the signal. Grimm’s engineers made the FPGA code more efficient and used the capacity this freed up to carry more bits through that path, so the rounding errors that reach the noise shaper are smaller.

In plain English

Think of the FPGA as a calculator doing millions of sums a second on your music. Grimm has made its code more efficient and used the room that freed up to work to more decimal places. More decimal places mean smaller rounding errors, so the signal arriving at the last stage of the DAC is more exact. Eelco expects more refinements like this one.

The fixes and JPlay

Alongside the fix for the sample-rate click, the change log lists five more. Among them are fixes for DSD over UPnP, which could be corrupted, and for a first track that sometimes wouldn’t play over UPnP. Qobuz links are now read properly too, so JPlay no longer needs a proxy.

Grimm says UPnP is now more stable on the MU1 and the MU2, and that this strengthens its JPlay Certified partnership. JPlay, a music app for iOS and macOS, has been fully integrated with both streamers since its version 1.4.3 in July.

What the MU2 is

The MU2 combines a music streamer with a DAC and an analogue preamplifier in one case. It has a Roon server built in and works as a Roon Ready endpoint, a UPnP renderer and a Tidal Connect player. Its relay-based analogue volume control lets it feed power amplifiers directly, so it can be the hub of a hi-fi system.

Its DAC is Grimm’s own design, the Major DAC, developed in house over three years. It pairs Pure Nyquist upsampling filters with an 11th-order noise shaper in a 1.5-bit architecture on Grimm’s own FPGA board, and Grimm’s article on the Major DAC explains it in depth. The MU1, the sister model with digital outputs, gets the UPnP and JPlay changes in its version 2.0.8 without the DAC work.

How to update an MU2

Grimm invites every MU1 and MU2 owner to run the update, and the steps are in the software manual on Grimm’s MU2 page. On the MU2 the update sits under Software Version and Update, on page 6 of 7 of the Settings menu, where a short press starts it and a second press confirms it.

The manual says the install can take up to about 30 minutes, and the MU2 must stay plugged in because unplugging it makes the update fail. Roon Server updates come separately through the Roon app.

The wider view

Alpha Audio reviewed the MU2 a second time in February, after an earlier update had added UPnP and Tidal Connect, and wrote that “The hallmark of the Grimm MU2 is its completely effortless, transparent sound.”

In Stereophile, Alex Halberstadt lived with an MU2 for his Brilliant Corners column in July and found that “The Grimm is one of those rare components that nails both functionality and performance while remaining reliable.”

In August, Robert Harley of The Absolute Sound interviewed Eelco Grimm, Grimm Audio’s co-founder and designer, about DSP in the LS1c loudspeakers. Eelco told him that “listening tests are a fundamental aspect of DSP-code development.” We wrote about Eelco Grimm’s approach to hi-fi in September.

Grimm Audio in Bath

The MU2 is in our shop, alongside the rest of our Grimm Audio range, and our own review of it dates from February 2025. Our demo MU2 is out on a home demonstration loan at the moment. When it comes back, I’ll run my own listening tests on the update and report what I hear here. If you’d like to talk about the MU2 before then, contact us or call Dan on 07736 454506.

About the author

Dan Crick founded Hidden Home Technology in Bath and has worked in high-end audio for 25 years. The company is a member of CEDIA, and its installations have won Gold and Silver at the URC Unsurpassed Awards. There is more about Dan and the team on our About us page.