£15,000.00
TAD’s Evolution Two is a compact floorstander built around a beryllium tweeter and Aramid-composite bass drivers, delivering wide-bandwidth, high-resolution sound from a slim cabinet finished in real walnut.
The E2 Evolution Two is a floorstanding loudspeaker from TAD (Technical Audio Devices), the high-end division founded on decades of professional and studio engineering. It brings much of TAD’s flagship thinking — notably its coincident driver philosophy and precision cabinet work — into a comparatively slim, room-friendly floorstander. This example is finished in walnut veneer.
The cabinet measures 320 × 1,085 mm (1,113 mm on its spikes) × 405 mm (W × H × D), giving a small footprint that suits real rooms. A 10 mm-thick solid-steel base plate is fixed to the underside to reinforce the structure around the port. The real-walnut finish gives the E2 a warm, natural appearance in keeping with its price.
The Evolution Two is a 2.5-way design quoted with a frequency response of 30Hz–60kHz, a sensitivity of 87dB (2.83V/1m) and a 6-ohm rated impedance, handling up to 150W. That bandwidth — deep bass to well beyond audibility — underpins the openness and detail for which TAD is known, from a cabinet that belies its physical size.
A 25 mm beryllium-diaphragm tweeter handles the mid-to-high range with speed and refinement, working alongside redesigned Aramid-composite woofers, with crossover points at 90Hz and 2,800Hz. The bass is loaded by a bottom-mounted port with openings to both front and rear, which effectively enlarges the port area so air moves more slowly — aiding a clean, low-noise low end.
Beryllium is prized for tweeters because its stiffness-to-mass ratio pushes break-up modes well beyond the audible band, allowing an extended, low-distortion treble. TAD pairs this with Aramid-composite bass cones and a carefully engineered port structure, reinforced by the steel base plate, to keep resonance and turbulence low across the range.
Type: 2.5-way floorstanding loudspeaker. Tweeter: 25 mm beryllium diaphragm. Bass drivers: Aramid-composite. Frequency response: 30Hz–60kHz. Sensitivity: 87dB (2.83V/1m). Impedance: 6 ohms. Maximum input power: 150W. Crossover: 90Hz and 2,800Hz. Loading: bottom-mounted port with front and rear openings; 10 mm solid-steel base plate. Dimensions: 320 × 1,085 mm (1,113 mm with spikes) × 405 mm. Finish: walnut veneer.
The Evolution Two suits the listener who wants genuine high-end resolution and wide bandwidth without a large or dominant cabinet. Its small footprint and refined walnut finish make it well suited to a living room used seriously for music, as well as a dedicated listening space.
Loudspeakers of this class reward careful matching to the room and to partnering electronics. We can demonstrate the Evolution Two, advise on amplification and placement, and arrange delivery and installation across the South. Speak to our team to arrange a listen or to discuss your project.
