£6,500.00
The on-wall speaker of Sonus faber’s third-generation Olympica Collection: a sealed two-way design with a DAD Arrow Point silk tweeter and a 165 mm Camelia mid-woofer, supplied with its mounting bracket, in walnut or wenge. Priced each.
The Olympica Wall is the on-wall speaker of the Sonus Faber Olympica Collection, now in its third generation (Olympica G3), listed in the collection as the Olympica W. It is designed for music and cinema, and it takes the place of the Olympica Nova W in the range.
It brings the lute-shaped Olympica cabinet to the wall, in hand-finished walnut or wenge with solid aluminium and leather. Sonus faber includes the mounting bracket and has optimised the speaker for placement near boundaries. Each speaker weighs 9 kg.
A 28 mm DAD Arrow Point extended-frequency silk tweeter works with a 165 mm Camelia paper-cone mid-woofer with a copper cap, in a sealed box, crossing over at 2,300 Hz. It has a single pair of binding posts.
Type: two-way on-wall loudspeaker, sealed box. Drive units: 28 mm DAD Arrow Point extended-frequency silk tweeter; 165 mm Camelia paper-cone mid-woofer with copper cap. Crossover point: 2,300 Hz. Frequency response: 78 Hz to 40 kHz. Sensitivity: 89 dB SPL (2.83 V/1 m). Nominal impedance: 4 ohms. Recommended amplifier power: 30 to 200 W, undistorted signal. Connections: two binding posts. Mounting: bracket included. Dimensions: 562 × 308 × 215 mm each. Weight: 9 kg each. Finishes: walnut or wenge. Priced each.
The Olympica Wall is for a room where floor space is short, or for the surrounds of a home cinema built around Olympica speakers, so that every channel matches in finish and in voice.
Sonus faber recommends 30 to 200 watts. As surrounds we would run it from a StormAudio or Trinnov processor, with the Olympica Center and a pair of Olympica floorstanders across the front.
The wall it hangs on has to carry 9 kg a speaker securely, and the cable is best planned into the wall before decoration. We survey the walls and fit the brackets as part of the installation.
The Olympica I is the bookshelf model of the same collection, and the Olympica III and Olympica V its floorstanders. Read our piece on the new Olympica G3, and see the full range on our Sonus Faber page.
The Olympica Wall is available to order through us. We can help you choose the right model and finish for your room, match the amplification and handle delivery, installation and set-up across the South. Speak to our team to talk it through.
